manualshive.com logo in svg

Fresenius Medical Care 5008, Service Manual

Share
Download
Fresenius Medical Care 5008 Service Manual Download Page 65

Chapter 6:  TSC / TMC / Maintenance

Fresenius Medical Care 5008 SM 1/08.04

6-1

6

TSC / TMC / Maintenance

6.1

Important Information

This chapter includes the Technical Safety Checks (TSC), the 
Technical Measurement Checks (TMC) and the Maintenance 
Procedures (MA) to be performed.
(Technical Measurement Checks are applicable only to Item 6.4 BPM.)

The Technical Safety Checks (TSC) and the Technical Measurement 
Checks (TMC) must be carried out every 2 years (24 months).

Performance of the Technical Safety Checks must be entered in the 
Medical Device Register.

The following applies to the technical measurement checks. After 
successful completion of the technical measurement checks, the 
respective parts of the hemodialysis system must be identified with a 
sign (label). This label must, in a unique and traceable manner, specify 
the year of the next Technical Measurement Check and the authority or 
person having performed the Technical Measurement Check.

Performance of the Maintenance Procedures (MA) is recommended by 
the manufacturer. The maintenance procedures must also be carried 
out every 2 years (24 months) and ensure smooth operation.

Precautions for working on the system

Assembly, extensions, adjustments, modifications or repairs may only 
be carried out by the manufacturer or persons authorized by him.
The activities described in the Technical Manual require the availability 
of the necessary technical measuring equipment and accessories.
Respect the following precautions when working on the open system:
Protect the components against ingress of fluids.
Do not touch live parts (e.g. connectors of the power cord or heater).
When repairing and when replacing spare parts, observe the applicable 
ESD precautions (e.g. EN 100 015-1).

Summary of Contents for 5008









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands