Fresenius Medical Care 5008, Service Manual

Page: 13 / 168

Chapter 3: Specifications
Fresenius Medical Care 5008 SM 1/08.04 3-3
Water drain 0 to 100 cm above the floor, minimum 5 cm free fall. The water drain
must be located at a lower level than the dialyzer position.
Concentrate supply 0 to -100 mbar; maximum suction height 1 m
with Central Delivery System (option): 0.05 to 2.0 bar
Heat dissipation Dialysis:
approx. 400 Watt (at an ambient temperature of 20 °C)
Range of operating
temperature 15 °C to 35 °C
Atmospheric pressure 700700 hPa to 1060 hPa
Relative humidity 30 % to 75 %, temporarily 95 %
Stability 5°
IV pole load capacity Maximum: 5 kg
Maximum load capacity of one hook: 5 kg
O
External connection options
LAN Interface for the exchange of data.
Electrically isolated by transformer.
Port: RJ 45
RS232 Interface for the exchange of data.
Electrically isolated by optocoupler.
Port: DSUB 9-pin
Caution
Any additional equipment connected to the analog and digital interfaces
of the machine must comply with the applicable EN specifications (e.g.
EN 60950 for data processing equipment and EN 60601 (IEC 601) for
electro-medical equipment).
Apart from this requirement, all configurations must comply with the
system standard EN 60601-1-1 (IEC 601-1-1), or their applicability with
regard to safety has to be proven by a certificate issued by a testing
agency authorized to test the ready-for-use machine.
The connection of additional equipment to the signal input or output
component affects the system configuration and anyone connecting
additional equipment is therefore responsible for compliance with the
system standard EN 60601-1-1 (IEC 601-1-1).
Caution
The external alarm indicators do not relieve the operator of the
obligation to observe the local alarms of the system.