Fresenius Medical Care 5008 Service Manual Download Page 162

Page: 162 / 168

Chapter 12: Service Program (Option)

12-36

Fresenius Medical Care 5008 SM 1/08.04

PC Service-Software 5008

Page 36 from 41

4/29.04

Starts the software update of the 5008 in accordance with the operator's
selection

Opens the software update file.

Saves the software status to a file (*.5008sws).

Prints the software status.

Displays the

Print Preview

Shows the file name of the software update file that has been opened.

Shows information on the software versions of the individual modules.

- Module:

Symbols:

The module shall not be updated.
The module shall be updated.
The module shall be updated but with an older

version!
The update status can be changed by double-clicking
the symbols.

Module name of the respective module, e.g. Monitor-OS

- Type:

•

File:

the information in this line refers to the

version in the software update file for the
respective module.

•

Flash:

the information in this line refers to the

version on the CompactFlash of the 5008 for the
respective module.

•

Module:

the information in this line refers to the

version installed in the respective module.

- Version:

version

- CRC:

cyclic redundancy check

- Date:

data and time of compilation

The operator can select if all modules are to be updated completely (check box
checked) or if only the files listed in the service report which are missing or
which are defective are to be updated (check box not checked).

More service report information for the operator:

•

Files which are required by 5008 but which are missing or defective.

Summary of Contents for 5008









































































































































































Search results

Summary of Contents for 5008

Reviews:

Brands by name

Popular brands

Fresenius Medical Care 5008, Service Manual

Search results

Summary of Contents for 5008

Reviews:

Brands by name

Popular brands