Fresenius Medical Care 5008 Service Manual Download

Page: 101 / 168

Chapter 9: Calibration / Adjustment

Fresenius Medical Care 5008 SM 1/08.04

9-1

Calibration / Adjustment

Selecting calibration

Turn the system on.

Insert the technician's card.

Touch the

SYSTEM

button.

Touch the

SERVICE

button in the SYSTEM screen.

Message:

Please remove service card.

Touch the

CALIBRATE

button on the SERVICE SCREEN.

If a red "K" is shown in one of the fields, this indicates that no valid
calibration value is available.

Calibrating the touch screen

Select the

Calibrate touch screen

field. Touch the

Start calibration

button.

The following message will be displayed on the upper left:

Please touch

the target points

. Touch the "target points".

The following message will be displayed on the lower right:

Please

touch the target points

. Touch the "target points".

When the touch screen has been calibrated, the CALIBRATE SCREEN
will be displayed.

INFO
If the menu cannot be selected (touch screen decalibrated), use the
following combination of buttons on the monitor. Consecutively press
and hold the

Mute

key, the

Blood system Start

key and the

Blood

system Stop

key.

Pressure transducer (S03/ S07/ S16)

Select the

Pressure transducer (S03/ S07/ S16)

field. Touch the

Start

calibration

button.

Automatic adjustment of the zero of the pressure transducers S03, S07
and S16.

When the pressure transducers have been calibrated, the following
message will be displayed:

Please check or recalibrate degassing

(A01/P01) and loading pressure (A02/P02).

Touch the

Confirm

button.

Summary of Contents for 5008









































































































































































Search results

Summary of Contents for 5008

Reviews:

Related manuals for 5008

Brands by name

Popular brands

Fresenius Medical Care 5008, Service Manual

Search results

Summary of Contents for 5008

Reviews:

Related manuals for 5008

Brands by name

Popular brands