manualshive.com logo in svg

Fresenius Medical Care 5008, Service Manual

Share
Download
Fresenius Medical Care 5008 Service Manual Download Page 104

Chapter 9:  Calibration / Adjustment

9-4

Fresenius Medical Care 5008 SM 1/08.04

O

Flow pump (A03)

Select the 

Flow pump (A03)

 field. Touch the 

Start calibration

 button.

The following message will be displayed: 

Adjustment of relief valve A03. 

between 2550 and 2650 mbar Pressure S15: XXXX mbar. 

If the 

pressure is within the range, touch the 

Confirm

 button

.

The CALIBRATE SCREEN will be displayed. The flow pump (A03) is 
now calibrated.

If the pressure limitation is not within the desired range, it must be 
adjusted using A03.

O

Temperature (PT7/ PT8/ PT9)

Select the 

Temperature (PT7/ PT8/ PT9)

 field. Touch the 

Start 

calibration

 button.

Measure the reference temperature with an external measuring 
instrument.

Basic requirements:
The hemodialysis system

 must be closed.

Flow on, response time approx. 10 minutes

Select the 

Ref. temp.

 field. Enter the reference temperature. Touch the 

OK

 button to confirm the value entered. Touch the 

Accept value

 

button.

The CALIBRATE SCREEN will be displayed.

A03

Summary of Contents for 5008









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands