Fresenius Medical Care 5008 Service Manual Download Page 145

Page: 145 / 168

Chapter 12: Service Program (Option)

Fresenius Medical Care 5008 SM 1/08.04

12-19

Menu/Toolbar

4/29.04

Page 19 from 41

Service Data Recorder

When clicking this menu option the

Service Data Recorder

view will be

displayed.
Here the operator can

•

read which service data recorder files have been saved to the
CompactFlash of the 5008.

•

save selected service data recorder files.

•

delete selected service data recorder files.

Menu Options/Toolbar:

Extras

Software Update:

When clicking this menu option the

Software Update

view will be displayed.

Here the operator can

•

download the Service report from the 5008.
This report includes the software versions, the CRC, the creation date of
the individual modules and information on missing files.

•

select if files on the CompactFlash and/or modules are to be updated.

•

upload the selected files to the 5008 and update the selected modules.

Summary of Contents for 5008









































































































































































Search results

Summary of Contents for 5008

Reviews:

Brands by name

Popular brands

Fresenius Medical Care 5008, Service Manual

Search results

Summary of Contents for 5008

Reviews:

Brands by name

Popular brands