Franklin Q-link, Installation, Programming Operation, & Maintenance Manual

Page: 60 / 125

60
7.6 View Information Parameter Group
Code
Modbus
Address
Full Parameter Name
OLED Display
Name
Parameter Setting Range
Adj.
During
Run
1 601 VFD Output Frequency Output Frequency 0.00 to 240.00 [Hz] N/A
2 602 Motor Speed Motor Speed 0 to 3600 [RPM] N/A
3
603 Wattmeter [1] Wattmeter 0 to 4,294,967,295 [kWh] N/A
604 Wattmeter [2]
5 605 Average Output Current Average Current 0.0 to 6xVFD FLA [A] N/A
6 606 Line U Current Line U Current 0.0 to 6xVFD FLA [A] N/A
7 607 Line V Current Line V Current 0.0 to 6xVFD FLA [A] N/A
8 608 Line W Current Line W Current 0.0 to 6xVFD FLA [A] N/A
9 609 DC Bus Voltage DC Bus Voltage 0 to 1000 [V] N/A
10 610 Output Voltage Output Voltage 0 to 600 [V] N/A
11 611 Output Status Output Status 0 ‐ VFD Off
1 ‐ Accelerate
2 ‐ Decelerate
3 ‐ Steady
4 ‐ Speed search
5 ‐ Flying start
6 ‐ DC Output
7 ‐ Preheat
8 ‐ DC trip prevention
9 ‐ Stall prevention
10 ‐ Bypass off
11 ‐ Bypass run
N/A
12 612 System Status System Status 0 ‐ VFD stop
1 ‐ VFD run
2 ‐ VFD disabled
3 ‐ VFD fault
4 ‐ VFD shutdown
5 ‐ VFD fireman's
override
6 ‐ VFD auto reset
8 ‐ Power ‐ on delay
12 ‐ Signal loss
14 ‐ PID run
15 ‐ Open damper
18 ‐ Bypass stop
19 ‐ Bypass manual
20 ‐ Bypass override
22 ‐ Bypass auto on fault
23 ‐ Bypass disabled
24 ‐ Bypass fault
25 ‐ Bypass shutdown
27 ‐ Bypass auto on
comms loss
N/A