Franklin Q-link, Installation, Programming Operation, & Maintenance Manual

Page: 85 / 125

85
PROT-9: Bypass MOL Class
Bypass MOL Class
9) 10 0 - Class 5
1 - Class 6 (Pump)
2 - Class 10
3 - Class 20
Default: (2) 10
Motor overload industry standard class curve
selections. (ONLY for VFD)
PROT-12: Overcurrent Level
Overcurrent Level
12) 200% Min: 70%
Max: 200%
Default: 200%
% of motor FLA. If any phase current is greater
than setting for MOC delay, VFD trips.
This level as a percentage of Motor FLA
determines a fault trigger point. If motor current
exceeds this level for PROT ‐ 13 Delay time, the
VFD trips on Motor Overcurrent (MOC). This is a
safeguard from running the motor with windings
or motor leads electrical failure.
PROT-13: Overcurrent Delay
Overcurrent Delay
13) 0.1s Min: 0.1s
Max: 5.0s
Default: 0.1s
Delay before Motor Overcurrent Fault occurs.
Sets the delay time for the Motor Overload trip.
Timer starts when the current exceeds PROT ‐ 12
level. Timer will be reset if counting during
Motor Overload Current Condition and the
current drops below the Motor Overload Current
Level.
PROT-38: Critical Fault Retries
Crit Fault Retries
38) 3 Min: 0
Max: 10
Default: 3
Sets number of retry attempts. 0 = disabled.
PROT-39: Critical Fault Retry Delay
Crit Fault Retry Delay
39) 180s Min: 0s
Max: 6000s
Default: 180s
Sets time delay before retry attempts. Available
when PRIMARY ‐ 18 is greater than 0
PROT-40: Normal Fault Retries
Nrml Fault Retries
40) 3 Min: 0
Max: 10
Default: 3
Sets number of retry attempts. 0 = disabled.
PROT-41: Normal Fault Retry Delay
Nrml Fault Retry Delay
41) 120s Min: 0s
Max: 6000s
Default: 120s
Sets time delay before retry attempts. Available
when PRIMARY ‐ 18 is greater than 0.