Franklin Q-link, Installation, Programming Operation, & Maintenance Manual

Page: 117 / 125

117
BACnet
Object
Instance
Read/
Write
Full Parameter Name OLED Display Name Units Parameter Setting Range
48 R/W Comms Loss Action Com Loss Action x
0 – Fault
1 – Stop (uses selected stop
mode)
2 – Hold Speed
49 R/W Parity/Stop Bits Modbus RTU x
0 ‐ None, 2 Stop
1 ‐ Even, 1 Stop
2 ‐ Odd, 1 Stop
3 ‐ None, 1 Stop
50 R/W Bluetooth Enable Bluetooth x
0 ‐ Disable
1 ‐ Enable
51 R Output Status Output Status
0 ‐ VFD Off
1 ‐ Accelerate
2 ‐ Decelerate
3 ‐ Steady
4 ‐ Speed search
5 ‐ Flying start
6 ‐ DC Output
7 ‐ Preheat
8 ‐ DC trip prevention
9 ‐ Stall prevention
10 ‐ Bypass off
11 ‐ Bypass run
52 R System Status System Status x
0 ‐ VFD stop
1 ‐ VFD run
2 ‐ VFD disabled
3 ‐ VFD fault
4 ‐ VFD shutdown
5 ‐ VFD fireman's override
6 ‐ VFD auto reset
8 ‐ Power ‐ on delay
12 ‐ Signal loss
14 ‐ PID run
15 ‐ Open damper
18 ‐ Bypass stop
19 ‐ Bypass manual
20 ‐ Bypass override
22 ‐ Bypass auto on fault
23 ‐ Bypass disabled
24 ‐ Bypass fault
25 ‐ Bypass shutdown
27 ‐ Bypass auto on comms loss
56 R/W Run/Stop
0 ‐ Stop
1 ‐ Run
57 R/W Reset Fault
0 ‐ None
1 ‐ Reset
58 W Reset User Settings x
0 ‐ No
1 ‐ Factory Defaults
60 R/W
Reset Motor Run
Time
Motor Run Time x
0 ‐ No
1 ‐ Yes