Franklin Q-link, Installation, Programming Operation, & Maintenance Manual

Page: 58 / 125

58
7.5 Communications Parameter Group
Code
Modbus
Address
Full Parameter Name
OLED Display
Name
Parameter Setting
Range
Adj.
During
Run
1 501 Protocol Protocol 0 ‐ Modbus RTU
1 ‐ Modbus TCP/IP
2 ‐ BACnet MS/TP
3 ‐ BACnet IP
Yes
3 503 Write Access Write Access 0 ‐ Disabled
1 ‐ Enabled
Yes
4 504 Loss of Comms Com Loss Action 0 – Fault
1 – Stop (uses selected
stop mode)
2 – Hold Speed
Yes
5 505 Timeout Com Loss Delay 0.1 to 120.0 [Sec] Yes
6 506 Baudrate RS ‐ 485 Baud 0 ‐ 9600
1 ‐ 19200
2 ‐ 38400
3 ‐ 57600
4 ‐ 76800
5 ‐ 115200
Yes
7 507 Parity/Stop Bits Modbus RTU 0 ‐ None, 2 Stop
1 ‐ Even, 1 Stop
2 ‐ Odd, 1 Stop
3 – None, 1 Stop
Yes
9 509 Modbus Device Address Modbus RTU
Address
1 ‐ 247 Yes
10 N/A BACnet MAC/ID BACnet MS/TP
MAC Address
0 to 127 Yes
11 N/A BACnet Max Master BACnet MS/TP
Max Master
0 to 127 Yes
12 N/A BACnet Device Instance BACnet Device 0 ‐ 4194303 Yes
27 527 Comms Run/Stop N/A 0 ‐ Stop
1 ‐ Run
Yes
28 528 Comms Command Frequency N/A Min Freq Limit to High
Freq Limit
Yes
29 529 Comms PID Setpoint N/A 0.0 to 95% of [PID
Feedback Max]
Yes
30 530 Comms Reset Fault N/A 0 ‐ None
1 ‐ Reset
Yes
36 536 Bluetooth Enable Bluetooth 0 ‐ Disable
1 ‐ Enable
Yes