Fourier DataNet User Manual Download

Page: 58 / 212

Whenever a logger on the network is in alarm status, the external
alarm will be activated. Refer to section

3.7.6 for more details.

3.7.

Data Logger Sensor
Overview

This section provides an overview of the hardware
specifications of the DataNet data loggers.

3.7.1.

Internal Sensor Types

The DNL810, DNL910, DNL920, DNL910-PA and DNL920-PA
loggers include internal sensors, depending on the logger
model.

Sensor

Measurement

Range

Accuracy

Logger

Model

Digital Humidity

5% to 95%

±3% (in DataNet
software)
±4% (on logger LCD)

DNL920
DNL920-PA
DNL810

±0.5 ºC

DNL920
DNL920-PA

Digital Temperature -20 ºC to 50 ºC

±0.4 ºC

DNL810

Temperature
PT100

-20 ºC to 50 ºC

±0.3 ºC

DNL910
DNL910-PA

Summary of Contents for DataNet





















































































































































































































Search results

Summary of Contents for DataNet

Reviews:

Related manuals for DataNet

Brands by name

Popular brands

Fourier DataNet, User Manual

Search results

Summary of Contents for DataNet

Reviews:

Related manuals for DataNet

Brands by name

Popular brands