149
2. Enter a Group name and add your existing contacts to the
group by selecting the checkbox next to the Contact
name.
3. Click
OK
to create the Group. In the Groups tab you may
choose to add a group, edit an existing group or remove a
group from the list.
4.13.3.
Notifications Setup Tab
1. Once the contacts have been created you may start
defining which contacts should receive the alarm
notifications.
2. The pane on the left-hand side of the
Notifications Setup
tab displays all the units, loggers or Repeaters, which
have been configured in your network. You must define
the alarm notifications for each unit in turn. Select the first
unit you wish to define.
3. The
or
SMS
tab is now active for the unit selected
in step 1 above. In this tab, select the type of alarm for
which the notification should be sent in the event that the
predefined alarm level is breached.
4. Only the sensors which were configured in the logger
Setup, with alarms levels, are enabled in this tab. In
addition, any online Repeater will be enabled for sending
battery alarm or reception alarm notifications.