80
3.14.
Operating the DNR800 Mini
Repeater
This section explains how to operate the Mini Repeater using
the multi-functional button on the logger front panel. There is
no LCD screen on the Mini Repeater.
Ensure the device Serial Number has been added to the
Device Filter before continuing. Refer to section
2.5.3.
3.14.1.
Turning the Unit Off and On
The Mini Repeater is powered by external AC power supply
only. There is no battery backup. When the AC adapter is
connected, the unit is switched on and will automatically
search for a network. When disconnected the unit is shutdown
and is disconnected from the network.
Turning the Unit On and Joining a Network
The action of turning on a unit means that it will also have to
join a network.
1. Connect the unit to AC power.
2. The device will search for a network. The LED will blink
orange until either of the following two scenarios occurs:
The device cannot find a network and the LED will
blink red three times. The device will shutdown.
Note:
The Mini Repeater won’t find a network if its SN
wasn’t entered in the Device Filter, if the Receiver isn’t
online or if the network is locked (go to the Network
menu to unlock).
The device finds a network and the LED blinks green
three times. It has now joined a network.
