56
The DataNet
logger display indicates when the sensor reading
is in alarm of any type. The symbols AL-H, AL-L, AL-P-H or
AL-P-L are visible next to the corresponding input readings.
Refer to section
4.13 for more details.
3.7.11.
Sensor Calibration
The DataNet data logger is shipped fully calibrated. However,
further calibration can be applied via the DataNet software.
The calibration parameters are sent to the data loggers
wirelessly and stored in the logger’s memory.
Users may calibrate individual input as well as all inputs at
once. Calibration settings may be saved and then loaded into
the logger at a later date if the calibration settings have
changed.
Refer to section
4.13.4 for more details.
3.8.
Unit Serial Number and
Comment
Every DataNet data logger and Receiver/Repeater unit is
embedded with a unique serial number.
The data logger only can be loaded with a descriptive
comment to identify its task and location. You may add or edit
the comment of any logger on the network via the DataNet
software.
Every time data is transferred to the computer it is labeled
both with the logger’s serial number and comment and is
displayed in the graph or data table view.
The unit serial number is also marked on a sticker on the back
of the product.
