112
on, the software won’t detect the unit. You will have to use the
Detect Receiver feature.
The Receiver may also lose power and go offline while
connected to the USB, in which case you will also need to
detect it manually.
If no Receiver is detected by the software an error message
will pop up stating that the Receiver was not detected.
4.4.2.
Lock Network
By locking the network you do not allow any additional units to
join the network. During the network scan, the logger will not
even detect the network if it is locked.
By unlocking the network you leave it open for any unit to join
the network, even if you do not wish them to.
4.4.3.
Form New Network
Select this option to form a new network using the current
Receiver or another Receiver if you are building more than
one network. The Receiver will then form a new network
based on your RF environment. This will ensure optimal
network performance.
Refer to section
2.8 for more details on optimizing the
performance.
Once a new network is formed, any loggers connected to the
old network will need to rescan and join the new network. This
must be done manually by going to each logger and resetting
it via the LCD menu options.
Note:
Ensure all data is first downloaded from the loggers
before forming a new network. Once a new network is created
you won’t be able to recover the loggers’ data.
