170
Figure 58:
Printing a table
4.18.
System Password
Throughout the software you will be required to enter a
password to perform certain functions such as calibration or
firmware update.
Note:
The default password is 1234
.
To change the password:
1. In
the
Password
dialog box, click
Change Password
to
open the
Change Password
dialog box.
2. Enter the current password in the
Current Password
text
box.
3. Enter the new password in the
New Password
text box.
4. Enter the new password a second time in the
Confirm
New Password
text box to confirm your new password.
5. Click
OK
.
Note:
The password must include at least 4 characters and is
case sensitive.
