38
Repeater next to the room so that it is in range of as
many of these end units as possible, so you don’t
have to add more Repeaters.
8. After you have deployed the Repeater/s return to the
software and using the Show Network Paths feature verify
that all end units are now successfully transmitting to the
Receiver, either on their own or via a parent Repeater.
You can continue to tweak the position of the units until
you are satisfied with the quality of the transmission.
9. Now that the units are in place the last step of initial
deployment is to reconfigure each unit to start data
acquisition. Configure the sensor setup, sample rate,
transmission rate, alarm levels, Email/SMS notifications,
etc. as you see fit.