![background image](http://html1.mh-extra.com/html/madgetech/rhtemp2000/rhtemp2000_product-information-card_4391814001.webp)
MadgeTech, Inc.
PO Box 50
l
Warner, NH 03278
Phone 603.456.2011
l
Fax 603.456.2012
www.madgetech.com
l
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
REV A 2008.07.08
To view the full MadgeTech product line,
visit our website at
www.madgetech.com.
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
Product Information Card
RHTemp2000
RHTemp2000
Temperature and Humidity Recorder with LCD
Product Quick Reference Card
Part Number
RHTemp2000
Temperature Sensor
Semiconductor
Temperature Range
–20 to +60°C
Temperature Resolution
0.1°C
Calibrated Accuracy
+0.5°C (0 to 50°C)
Humidity Sensor
Internal Semiconductor
Humidity Range
0 to 95%RH
Humidity Resolution
0.1%RH
Humidity Accuracy
+3%RH (+2%RH @ 25°C Typical)
Memory
131,071/channel
Sample Rate
2 seconds to 24 hours
Required Interface Package
IFC110 or IFC200
Baud Rate
115,200
Typical Battery Life
1 year with display off, 30 days with
continuous LCD and no backlight
Operating Environment
–20 to +60°C, 0 to 95%RH (non-condensing)
Material
Black Anodized Aluminum
Dimensions
4.8” x 3.3” x 1.25” (112mm x 84mm x 32mm)
Approvals
CE
Specifications subject to change.
See MadgeTech’s terms and conditions at www.madgetech.com
Device Maintenance
Battery Replacement
Materials:
3/32” HEX Driver (Allen Key)
Replacement Battery (U9VL-J)
- Remove the cover from the device by unscrewing the four
screws.
- Remove the battery from its compartment and unsnap it
from the connector.
- Snap the new battery into the terminals and verify it is secure.
- Replace the cover taking care not to pinch the wires. Screw
the enclosure back together securely.
Note: Be sure not to over tighten the screws or strip the threads.
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT
SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE,
CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR
EXPLODE IF HEATED ABOVE 60°C (140°F).
Recalibration
The RHTemp2000 standard calibration is one point at 25°C and
two points at 25%RH and 75%RH.
Pricing:
Recalibration traceable to NIST
$90.00
Recalibration
$70.00
Additional:
As Found Data
$15.00
Additional Points
$15.00 per point
To send the devices back, visit www.madgetech.com, select
Services
then
RMA Process
.