Fostex DV-40, Operation Manual

Page: 48 / 182

4-12
The following describes how to record a digital source in the
NEW FILE mode
.
In the same way as recording an analog source, you can record a digital source in the NEW FILE mode to
a disk formatted in the Normal mode.
We assume that we are going to record a digital audio source in stereo.
Recording a digital source in the NEW FILE mode
Connection to external devices
1. Connect the external digital source outputs to the [TR2-1] of the [DIGITAL INPUT] section of the unit.
Channels L and R of the source are assigned to tracks 1 and 2 of the unit respectively.
The digital input signal format (AES/EBU or S/P DIF) is automatically recognized.
Preparation
+4dBu
-10dBV
+4dBu
-10dBV
+4dBu
-10dBV
+4dBu
-10dBV
TR4
TR2
TR3 TR1
TR3 TR1 BAL [+4dBu] BAL [+4dBu]
UNBAL
[-10dBV]
UNBAL
[-10dBV]
TR4 TR2 BAL [+4dBu] BAL [+4dBu]
UNBAL
[-10dBV]
UNBAL
[-10dBV]
OUTPUT
THRU
INPUT
VGA
VIDEO
10/100
LINK
TX/RX
TR4-3 TR2-1
TR2 TR1
TR1
TR2
1:GND
2:HOT
3:COLD
192kHz
176.4kHz
INPUT
OUTPUT
INPUT
75
Ω
ON OFF
INPUT
75
Ω
ON OFF
TR4-3 TR2-1
TR2 TR1
THRU
THRU OUTPUT
AC IN
1: GND 2: HOT 3: COLD
1: GND 2: HOT 3: COLD
1: GND
2: HOT
3: COLD
15P-REMOTE 9P-REMOTE
GPI
DIGITAL OUTPUT WORD
TIME CODE MONITOR ETHERNET ANALOG INPUT BALANCED ANALOG OUTPUT DIGITAL INPUT VIDEO
Word Clock
or
Video sync
External Digital Device
Digital Signal
(AES/EBU or S/P DIF)
2. Connect a pair of monitor speakers with built-in amplifiers or an amplifier/speaker system to the [TR
1] and [TR 2] connectors of the [ANALOG OUTPUT] section of the unit.
3. If you want to lock the unit to a word or video signal, feed an appropriate external clock signal to the
[WORD IN] or [VIDEO IN].
<Note>
When receiving a stereo digital signal with 176.4 kHz or 192 kHz Fs, connect channels L and R of the source
to [TR2-1] and [TR4-3] of the [DIGITAL INPUT] section respectively.