manualshive.com logo in svg

Fostex DV-40, Operation Manual

Share
Download
Fostex DV-40 Operation Manual Download Page 158

24

DV40 Owner’s Manual (Version V1.2 Supplement>

<8> Addition of “Circle Take?” UTILITY Menu

A newly added “

Circle Take?

” UTILITY menu allows to set or release the Circle Take on a

current audio file.
The audio file with Circle Take being set is “

@

” marked at the beginning of the file name,

which allows to distinguish between the file with Circle Take and the one without.

Setting the Circle Take will ease the file select function when importing an audio file to a
Dididesign ProTools and the ALE (Avid Log Exchange) file list entry. In addition, LIST PLAY
function using only audio files with Circle Take being set can be executed.

• Setting and releasing Circle Take

1. Recall the audio file you would like to set the Circle Take

2. While the unit is in STOP mode, press the [SHIFT] key and then [SETUP] key to enter the UTILITY

mode.

3. Select the “Circle Take?” menu by the JOG dial.

If the Circle Take of the current file is not set, “

CircleTake On?

” is displayed. (“

?

” flashes.) If the Circle

Take of the current file is already set, “

CircleTake Off?

” is displayed. (“

?

” flashes.)

4. In order to set the Circle Take, press the [ENTER/YES] key while “CircleTake On?” is displayed. In

order to release the Circle Take, press the [ENTER/YES] key while “CircleTake Off?” is displayed.

The display changes as shown below and the Circle Take will be set (be released) and the display
exits from the UTILITY mode. If the Circle Take is set (released), “

@

” will be added to (deleted from)

the beginning of the file name.

H

M

S

F

PGM

LTC

H

M

S

F

PGM

LTC

<Setting Circle Take>

<Releasing Circle Take>

“@” is added.

“@” is added.

Tips:

• Pressing the [F2] key on the PS/2 keyboard allows to directly access the “

Circle Take

” UTILITY

menu.

• Refer to the section “

Creating ALE file list

” for entering an audio file with Circle Take being set

to the ALE file list and LIST PLAY in detail.

Flashing

Flashing

Summary of Contents for DV-40























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands