manualshive.com logo in svg

Fostex DV-40, Operation Manual

Share
Download
Fostex DV-40 Operation Manual Download Page 120

12-2

How to select a Utility menu

To select a Utility menu, follow the procedure below.

1. While the unit is stopped, press the [SHIFT] key to enter the shift mode (the SHIFT indicator lights up).

2. Press the [SETUP] key.

The unit enters the Utility mode, while the SHIFT indicator turns off.
The first time the unit enters the Utility mode after turning on the power, the first level of the "

Rec Protect?

"

menu appears. Or if it is not the first time the unit enters the Utility mode after turning on the power, the
first level of the previously selected menu appears.

3. Rotate the jog dial (or use the [SKIP/CURSOR] |<</>>| keys to select a desired menu.

Rotating the jog dial left (or right) or pressing the 

[SKIP/CURSOR] |<< (or >>|

) key cycles through the Utility

menus in the following order (or reverse order).

SETUP

Flashing

Flashing

Flashing

Flashing

Flashing

Flashing

Flashing

Flashing

Flashing

Flashing

Summary of Contents for DV-40























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands