Fostex DV-40, Operation Manual

Page: 168 / 182

34
DV40 Owner’s Manual <Version V1.2 Supplement>
<15> Addition of “Delete Memory?” SETUP menu
A newly added “
Delete Memory?
” SETUP menu allows to delete all the memory points (04 ~ 99)
memorized in the internal flash ROM at once. Deleting optional memory point (s) using this
SETUP menu is also possible.
• Deleting Memory Points all at once
1. While the unit is in STOP mode, press the [SETUP] key to enter the SETUP mode.
2. Select the “Delete Memory?” menu and press the [ENTER/YES] key.
“
04 - 99
” is displayed. (“
04
” flashes.)
The left 2 digits indicates the memory point number to be deleted from and the right 2 digits
indicates the memory point number to be deleted to. “
04 - 99
” indicates that the memory points from
04 to 99 are to be deleted.
3. Press the [ENTER/YES] key again.
4. Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP mode.
Flashing
SETUP
SETUP
Flashing
Tips:
• In order to delete all the memory points at once, go to the next step while “04 - 99” is
displayed.
• In order to delete optional memory point (s), select the deleting range indicated below and
then go to the next step.
<Designating the deleting range>
Move the flashing point by the
[SKIP/CURSOR |<</>>|]
key and input the number by
the
JOG
dial (or
10
key). (The number from 04 to 99 can be input.)
If the equal number is set to the left and right, one memory point will be deleted.
Deleting only one memory point can be executed by the procedures mentioned in
the owner’s manual page 6-9.
<NOTE>
When designating the deleting range, input the right number so that it is equal
or greater than the left number. In case the left number is greater than the right
number, “Void!” will be displayed and inputting the number becomes invalid.
Tips:
A deleted memory number indicates the blank time information (—H—M—S—F—SF) in which no
time data is registered.