Fostex DV-40 Operation Manual Download Page 154

Page: 154 / 182

DV40 Owner’s Manual (Version V1.2 Supplement>

<6> Addition of Physical Format On / Off Setting in Disk Formatting

In the DVD-RAM disk formatting procedures, the item that selects “

ON/OFF of Physical Format

”

is newly added. Executing physical format will restore an old disk or disk causing many errors
at a certain degree.

Flashing

<New Format>

<Reformat>

Loading an unformatted disk will
automatically recall the “Format?”
UTILITY mode.

While the unit is in STOP mode, press
the [SHIFT] key and then [SETUP] key
to enter the UTILITY mode. Then select
the “Format?” menu and press the
[ENTER/YES] key.

Press the [ENTER/YES] key.

Flashing

Press the [ENTER/YES] key.

Press the [ENTER/YES] key.

Flashing

After editing the Reel No (Default setting:
S001), press the [ENTER/YES] key.
(Refer to the next page.)

<Selecting Format Mode>

Select either “Norm” or “Tape” by the JOG dial and press the [ENTER/YES] key.

Flashing

<Normal mode>

<Tape mode>

<Selecting On/Off of Physical Format>

<Selecting Disk Type>

Flashing

Select “On” or “Off” by the JOG dial and press the
[ENTER/YES] key. (Refer to the next page.)

Select “New” or “Used” by the JOG dial and press the
[ENTER/YES] key. (Refer to the next page.)

After confirming the message, press the [ENTER/YES]
key. (Refer to the next page.)

After confirming the message, press the [ENTER/YES]
key. (Refer to the next page.)

Summary of Contents for DV-40























































































































































































Search results

Summary of Contents for DV-40

Reviews:

Related manuals for DV-40

Brands by name

Popular brands

Fostex DV-40, Operation Manual

Search results

Summary of Contents for DV-40

Reviews:

Related manuals for DV-40

Brands by name

Popular brands