Fostex DV-40 Operation Manual Download

Page: 141 / 182

DV40 Owner’s Manual <Version V1.2 Supplement>

• Selecting video format

This menu sets the ALE file list Video format.

1. Display “Video FMT?” menu and press the [ENTER/YES] key.

The display changes to the Video format selectable condition and the current setting starts flashing.

Flashing

2. Select the format type by rotating the JOG dial and press the [ENTER/YES] key.

The Video format can be selected among “

NTSC

”, “

PAL

” and “

SECAM

”.

The selected video format is registered and the display goes back to the “

Video FMT?

” indication.

3. Press the [EXIT/NO] key (or [STOP]) key.

“

Save File Sure?

” is displayed urging you to update the file list and “

Sure?

” starts flashing.

<NOTE>

This selection is used in the ALE file list only. There is nothing related to the DV40 operation.

4. To update, press the [ENTER/YES] key. (If you do not to wish to do so, press the [EXIT/NO] key.)

Flashing

• Setting audio format (sampling frequency)

This menu sets the ALE file list Audio format.

1. Display the “Sample FRQ?” menu and press the [ENTER/YES] key.

The display changes to the Audio format (sampling frequency) selectable condition and the current
setting starts flashing.

Flashing

2. Select the Audio format by rotating the JOG dial and press the [ENTER/YES] key.

The Audio format can be selected among “

44k

” , “

48k

”, “

88k

”, “

96k

”, “

176k

” and “

192k

”.

The selected Audio format is registered and the display goes back to the “

Sample FRQ?

” indication.

3. Press the [EXIT/NO] key (or [STOP]) key.

“

Save File Sure?

” is displayed urging you to update the file list and “

Sure?

” starts flashing.

4. To update, press the [ENTER/YES] key. (If you do not to wish to do so, press the [EXIT/NO] key.)

<NOTE>

This selection is used in the ALE file list only. There is nothing related to the DV40 operation.

Summary of Contents for DV-40























































































































































































Search results

Summary of Contents for DV-40

Reviews:

Related manuals for DV-40

Brands by name

Popular brands

Fostex DV-40, Operation Manual

Search results

Summary of Contents for DV-40

Reviews:

Related manuals for DV-40

Brands by name

Popular brands