Fostex DV-40, Operation Manual

Page: 71 / 182

6-7
• Storing a time to a locate point using the numeric keys
You can recall and edit a locate point (CUE or MEMORY point) time and store the edited time.
1. While stopped, press a desired locate point key ([CUE POINT] or [MEMORY] key).
The display shows the locate bank and memory number (e.g. "Cue 03"), and a locate point time with
flashing memory number.
When pressing a locate point key (
[CUE POINT]
or
[MEMORY]
key) for the first time after turning on the
power, locate point memory "01" of the appropriate locate bank is shown.
2. Use the jog dial (or the numeric keys) to select a desired locate point memory number, and press a
desired locate point key ([CUE POINT] or [MEMORY] key) again.
The subframe value of the selected memory data starts flashing, showing that it can be edited.
There are two methods for time entry as described below.
• Use the |<</>>| keys to move the flashing (edit) point, and use the jog dial to enter a value.
If the value of the edit point overruns or underruns, the value of the left digit increments or decrements
respectively.
• Use the numeric keys to enter a time directly.
Each number is entered from the right digit, which moves left as additional digits are entered.
For example, to enter "00H 12M 15S 00F 00SF", press 0 -> 0 -> 1 -> 2 -> 1 -> 5 -> 0 -> 0 -> 0 -> 0.
3. After completing time entry, press the [ENTER/YES] key.
The edited time data is stored to the selected locate point memory and the display returns to the Normal
screen.
H M S F SF
2
1
-INT-
BWF
FORMAT
CLOCK
-0.1%
kHz
48
24
FS
BIT
ABS CUE
∞
60 50 42 34 28 2018 12 8
6 5 4 3 2 1 0 OL
H M S F SF
2
1
-INT-
BWF
FORMAT
CLOCK
-0.1%
kHz
48
24
FS
BIT
ABS CUE
∞
60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL
Flashing
Flashing
H M S F SF
2
1
-INT-
BWF
FORMAT
CLOCK
-0.1%
kHz
48
24
FS
BIT
MEMORY
ABS
∞
60 50 42 34 28 2018 12 8
6 5 4 3 2 1 0 OL
Flashing
Example after pressing the [MEMORY] key
Example after pressing the [CUE POINT] key
<Note>
If you select a locate point memory number that does not hold time data, "--H--M--S--F--SF" is shown
and you cannot edit the time.