Fostex DV-40, Operation Manual

Page: 53 / 182

4-17
• Shuttle cueing
1. Press the [SHUTTLE] key during playback (the SHUTTLE indicator lights up).
The shuttle mode is active.
The indicator light up, showing that the recorder stills.
2. Rotate the jog dial to start cueing.
You can cue forward or backward at a speed between 0 and twice the normal speed as if you are using
an analog tape recorder.
While cueing, the appropriate < or > indicator above the jog dial is lit according to the rotating
direction.
3. To quit the shuttle mode, press any of the transport keys (the [STOP] key, etc.).
If the cueing position comes to the ABS 0 or REC END point, the recorder automatically quits the
shuttle mode and stops.
• High-speed search
1. Press the [SHUTTLE] key while stopped (the SHUTTLE indicator lights up).
The shuttle mode is active.
The indicator light up and the recorder stills.
2. Rotate the jog dial to start searching.
You can search forward or backward at a speed between 0 and 32 times of the normal speed.
While searching, the appropriate < or > indicator above the jog dial is lit according to the rotating
direction.
3. To quit the shuttle mode, press any of the transport keys (the [STOP] key, etc.).
If the cueing position comes to the ABS 0 or REC END point, the recorder automatically quits the
shuttle mode and stops.
Cueing/high speed shuttle by the shuttle function
Using the shuttle function, you can perform the shuttle cueing or the high-speed search.
You can cue audio sound using the jog function as if you operate an analog tape recorder.
By installing the optional
"VGA card"
, you can cue audio while watching the waveform shown
on an external monitor display .
Cueing by the jog function
1. While stopped, press the [JOG] key (the JOG indicator lights up).
The jog mode is active.
The indicator above the jog dial lights up, showing that the recorder stills.
2. Rotate the jog dial to cue audio.
You can cue audio as if you are using an analog tape recorder.
While cueing, the appropriate < or > indicator above the jog dial is lit according to the rotating
direction.
3. To quit the jog mode, press any of the transport keys (the [STOP] key, etc.).