Fostex DV-40, Operation Manual

Page: 148 / 182

14
DV40 Owner’s Manual <Version V1.2 Supplement>
2. Select a desired ALE file list by the JOG dial (or [SKIP/CURSOR |<< >>| key] and press the [ENTER/
YES] key.
After “
<Wait!>
” is displayed, the LIST PLAY mode is set and an audio file entered at the beginning of
the file list becomes ready to play.
H M S F
PGM
LTC
3. Press the [PLAY] key.
According to the selected file list, continuous play can be executed.
Flashing
<NOTE>
Audio files which can be reproduced in the LIST PLAY mode have to match the same setting of Track
Mode and FS/BIT as the DV40 front panel SW condition.
If the audio file with a different setting from the DV40 front panel SW condition is entered, “
<<Silent
Area>>
” will be displayed and no sound is reproduced.
• LIST PLAY using ALE file list
By executing the LIST PLAY function, audio files which is entered in the ALE file list can be continuously
reproduced.
1. While the unit is in STOP mode, press the [LIST PLAY] key.
The [LIST PLAY] LED is lit solid and the display changes to the LIST PLAY mode selectable condition.
The default setting “
LTC_LINK
” is displayed and “
01
” flashes.
<NOTE>
The operating procedures listed below presumes that
4 audio files
(Take-1, Take-2, Take-3 and Take-
4) are entered in an ALE file list which is named as “
All_Take
”.
Tips:
On the disk in which the ALE file list is registered, in addition to the “
LTC_LINK
” mode,
“
SongLink
” and “
ALE file list
” can be selected. For “
LTC_LINK
” and “
SongLink
” modes, refer
to the original owner’s manual page 11-2 in detail.
Flashing
<NOTE>
If multiple ALE files are registered, all the ALE files can be selected.
Flashing Flashing
Flashing
Tips:
In order to continuously play back the file list in which the Circle Take being turned on, select
“
Circle Take
” as Remake Type and remake the ALE file list or create a new file list in which only the
files with Circle Take being turned on are entered.