Fostex DV-40 Operation Manual Download

Page: 144 / 182

DV40 Owner’s Manual <Version V1.2 Supplement>

<NOTE>

This setting is used for displaying the ALE file list only. There is nothing related to the DV40
operation.

3. After the entry, press the [EXIT/NO] key (or [STOP] key).

“

Save File Sure?

” is displayed urging you to update the file list and “

Sure?

” starts flashing.

4. To update, press the [ENTER/YES] key. (If you do not to wish to do so, press the [EXIT/NO] key.)

Selected audio files are now entered in a newly created ALE file list (e.g. All-Take) and “

SelEDL [All-

Take

” is displayed. (“

” is flashing.) The entered audio file can be confirmed by the operation

explained in the next section.

<Note>

If there is no audio file to be entered, “

<No File>

” will be displayed.

Tips:

Executing LIST PLAY function by the ALE file list is possible using the audio files entered in the
ALE file list. Refer to the page 14 in detail.

2. Rotate the JOG dial C.W.

The entered audio file can be confirmed. After the last audio file is displayed, “

*** [<New Entry>

”

(

***

: New entry number) to enter a new audio file will be displayed.

• Confirming entered audio file

The entered audio file can be confirmed by the following operations.

1. In the condition that “Sel EDL [All-Take” (03: flashing) is displayed, press the [ENTER/YES] key.

“

Remake EDL?

” is displayed.

Flashing

2. Select a file to enter by the JOG dial and press the [ENTER/YES] key.

A selected audio file is registered as entry number 001 and the display changes to the next entry
number 002 selectable condition.

PGM

Flashing

Tips:

It is convenient to set a “

Circle Take

” on an audio file that you would like to enter. The audio file

with the Circle Take being set is “

” marked at the beginning of the file name. You can use is as a

marker while selecting the audio file. Refer to the page 24 for “

Circle Take

” setting in detail.

Summary of Contents for DV-40























































































































































































Search results

Summary of Contents for DV-40

Reviews:

Related manuals for DV-40

Brands by name

Popular brands

Fostex DV-40, Operation Manual

Search results

Summary of Contents for DV-40

Reviews:

Related manuals for DV-40

Brands by name

Popular brands