Fostex DV-40 Operation Manual Download Page 91

Page: 91 / 182

9-7

Restoring a deleted audio file

You can restore a deleted audio file.

1. While stopped, press the [SHIFT] key to turn on the indicator.

2. Press the [SETUP] key.

The unit enters the Utility mode.
The first time the unit enters the mode after turning on the power, the

"Rec Protect?"

menu appears.

3. Use the jog dial to select the "Restore DelFile?" menu and press the [ENTER/YES] key.

The name of a deleted audio file flashes on the display.

4. Use the jog dial to select the file you want to restore and press the [ENTER/YES] key.

If there is more than one deleted audio file, you can select a desired file using the jog dial.

Pressing the

[ENTER/YES]

key restores the file immediately and the display shows

"Completed!"

followed

"Restore DelFile?"

5. Press the [EXIT/NO] or [STOP] key to exit the Utility mode.

The display shows "ABS 0" (the beginning) of the restored file.

Tips:

The restored file is numbered the same as before it was deleted.

<Note>

After deleting an audio file from a disk, if you optimize the disk, you cannot restore the deleted file
anymore. Or if you load a disk recorded by the DV40 and delete an audio file by the computer, the
deleted file cannot be restored by the DV40.

Flashing

Summary of Contents for DV-40























































































































































































Search results

Summary of Contents for DV-40

Reviews:

Brands by name

Popular brands

Fostex DV-40, Operation Manual

Search results

Summary of Contents for DV-40

Reviews:

Brands by name

Popular brands