![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002053.webp)
Page
53
/
62
The indicated points should be lubricated once a week!
Table 12. List of lubrication points of the cutter mechanisms
Mark
Cutter
mecha
nism
Type of
lubricant
Lubrication point
Figure
Knife
Grease
• Side surfaces of the guides (in contact with the knife
body)
• Internal surfaces of guides (in contact with rollers)
• Side surfaces of the knife body
• Fixing the hydraulic cylinder of the knife
• knife pulley
43,44
46
47
Back
gauge
Oil
guide roller (apply a thin layer of oil.)
lead screw (apply a thin layer of grease)
45
46
Clamp
Grease
• the pressure beam slides
• shaft bearings
• Attaching the hydraulic pressure cylinder
44
46
47
Figure 42. Way of unscrewing the covers
1
2
3