![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002047.webp)
Page
47
/
62
Figure 36. Diagram of using the cutting stick
Rotation of the cutting stick in both planes gives the possibility of obtaining four lines of
contact with the knife, marked in Figure 36 as 1, 2, 3, 4.
8.3 False clamp
The use of the false clamp under the pressure bar prevents marking made by the lower part of
the beam on the material to be cut.
Figure 37. False clamp plate (insert)
The false clamp insert (fig. 37) is attached under the front table in the place shown in figure 38.