Page
28
/
62
7.3.3 Emergency stop of the cutter
1. Press the button, 5 (Fig.15)
The switch is used for emergency stopping of the machine.
After pressing it, the message "Disable safety button" will appear on the touchscreen control
panel. The pressure clamp and knife will stop moving.
7.3.4 Starting the cutter after emergency stop
1. Unlock button, 5 (turn it to the left, it will pop out) (Fig.15)
2. Press the green button, 2
When the stop button has been engaged during the cutting cycle, pressing the cutting buttons
again will result in returning the clamping bar and knife to the upper position.
7.4 Determining the position of the back gauge
Danger!
Do not put your hands into the cutting area when back gauge moves!
Determining the position of the back gauge is carried out using the touchscreen, 1, and hand
wheel, 2 (Fig. 17).
INFO
The method of determining the position of the back gauge as well as the operation of the
touchscreen are described in the "Programming Manual."