Page
10
/
62
11. Uneven or rough surfaces
- precise workpiece
machining
- paint coatings
II
ELECTRICAL
1. Direct contact of active elements
- closed housing
- partially reduced voltage
supply to the control
system up to 24V AC/DC.
2,12
2 Indirect touch
- protection against indirect
contact according to PN-
EN 60204-1
- continuity of the
protective conductor
2.8 Safety Checks
Periodic safety checks should be performed:
check the correct position of the knife
control of the power supply of the cutter linear indicator
operation of the safety curtain
operation of the two-hand control function
protection against continuous knife movement.
