![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002031.webp)
Page
31
/
62
7.5.3 Rules for selecting the contact pressure.
The value of clamping force is selected experimentally, in relation to the type, width and height
of the material to be cut.
The following rules must be observed:
• the higher the pile, the greater the downforce necessary
• the greater the cutting width, the greater the downforce necessary
• the harder the material, the greater the downforce necessary
7.6 LED cutting line indicator
The cutter is equipped with an optical cutting line indicator. A thin light line indicates the
cutting line on the material to be cut.
7.7 Cutting (pressing and cutting)
Danger!
Do not put hands into cutting zone!