Page
19
/
62
5. OPERATION
5.1 Operating safety
5.1.1 Safety instructions
• Before use, operators should check to be sure all safety components are functioning properly.
• The cutter can only be operated if all safety components and safeguards such as detachable
covers, emergency stop switches are installed and fully functional.
• In the event of a malfunction, stop using the cutter immediately.
• All defects must be resolved immediately.
5.1.2 Warning about special hazards
Operators should refrain from performing any actions that risk their personal safety.
• DO NOT place hands into the blade/clamp area.
• Exercise extreme caution when handling the knife! Use transport handles when installing /
removing / carrying the knife.
• Use only undamaged and sharp knives!
• The knife should only be changed by trained personnel.
• When cutting on the work table, there must be no objects (such as keys, screwdrivers, tools)
5.2 Control system
Danger!
Danger!
The cutter cannot be operated with defective photocells forming the safety curtain!
