Page
20
/
62
7
Figure 10. Elements of the Cut-True 29H cutting machine operation and signaling
1. Main power switch
2. Emergency stop button
3. Button that activates the control system.
4. Buttons enabling the cutting cycle (two-hand cutting system)
5. Clamp pressure adjustment knob
- turn to the right - increases the pressure
- turn to the left - reduces the clamping force
6. Touchscreen control panel
7. Two-color signal lamp, displayed on the touchscreen.
- red, signals the power supply to the control system
- green, signals the activation of the control system
8. LED safety curtain (non-contact protection device)
8a. LED safety curtain - Transmitter
8b. LED safety curtain -Receiver
9. Foot clamp pedal (mechanical preview of the cutting line)
