![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002007.webp)
Page
7
/
62
2.4 Avoiding risks when operating the cutter
DANGER!
Operator must only use the machine in good technical condition.
At the beginning of each work shift and after each knife replacement, check the operation of the
safety devices. Interference in security or bypassing them (e.g. safety light curtains, two-handed
controls) creates a danger to life or injury!
2.5 Possible risks of operation and evaluation of residual risk
The Cut-True 29H is manufactured to the highest standards for use, and operator safety. Risks
remain, due to the failure of operator to follow proper use instructions.
Failure to follow the safety rules described in the operating instructions
Using the cutter for other purposes than those described in the user's manual
Allowing unauthorized persons, especially children, to use the cutter
Unauthorized machine alterations
Cleaning and lubrication of the cutter during operation
Working with dismantled or defective covers
Manipulation within the drive units and moving parts of the cutter during
operation
Checking the cutter's technical condition and performing servicing or repairs
with the cutting machine
Checking transmission gears during operation
2.6 Safety systems used in the cutter
•
Two-handed operation buttons
– blade is engaged using a two-handed start system, which
keeps operator’s hands out of the cutting area
•
LED Safety Curtain
– cutter will not operate if the safety curtain is not functioning