Page
34
/
62
8.1.1 Removing the knife
Figure 20.
8.1.1.1 Select the "Change knife" function on the touchscreen (Fig.20)
(Refer to the Programming Manual for specific information.)
8.1.1.2 Pressing the push buttons, 2
(fig.20) at the same time, start the cutting cycle. The
knife, 3, is held in the lower position.
8.1.1.3. Turn off the power supply of the electrical system by turning the main switch knob 4
(fig.20) to the "0" position
1
1
1
1
1
1
2
Figure.21
8.1.1.4 Remove the four screws 1 (fig.21) securing the cover, 2, and remove the cover.
