![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002032.webp)
Page
32
/
62
Fig. 19. Operating and signaling elements used during cutting.
Cutting can be done if:
1. there is no object in the work area of the light barrier - the green OSSD 1 LED lights up
(Fig.11) on the receiver 1 (Fig.19).
2. the green push button switch, 2 is pressed.
3. the two buttons, 3 are pressed simultaneously.
Keep both buttons, 3, pressed until the material is cut.
The knife and clamp will automatically return to the upper position after cutting.
NOTE: Releasing the buttons during the downward movement of the clamp and the knife will
interrupt this process.
If an object enters the safety curtain light barrier during cutting, the clamp and the knife
downward movement down will be cancelled. To continue cutting, remove the unauthorized
item and simultaneously restart both buttons, 3.
NOTE: Paper clips or other hard objects can damage the blade!