Page
40
/
62
Figure 28d. Fixing the knife in the package
1. Packaging
2. Cover
3. Screw
4. Nut
5. Washer
6. Knife
7. Knife change holder
8.1.2 Installing a knife
8.1.2.1. Remove all adjusting screws, 1 (figure 29) so that their faces are hidden in the knife bar
body.
Figure 29 B The adjusting screw does not protrude below the protrusion 2 in the cutter bar -
correct position.
Figure 29 A - the adjusting screw protrudes under the projection 2 in the cutter bar
- incorrect
position, remove the screw.
WARNING
The new knife must be able to support its upper surface with the projection of
the cutting stick. Failure to comply with this condition may result in a situation
when the new knife is higher than removed, potentially causing serious
overloading and even damage to the machine.
