Fluke Versiv, User Manual

Page: 111 / 260

Chapter 6: Certify Fiber Cabling
Connectors, Keys, and LEDs
97

PASS
LED comes on when a test passes.
TEST
LED comes on during a test and when you manually turn
on one of the output ports (  ).
FAIL
LED comes on when a test fails.
TALK
LED comes on when the talk function is on. The LED
flashes until the main tester accepts the request to talk.
TONE
LED flashes if you press

when a main tester is not
connected to the remote or is in
Far End Source
mode.
LOW BATTERY
LED comes on when the battery is low.
The LEDs also have these functions:

Battery gauge (see Figure 1 on page 13)

Volume indicator for the
TALK
function
 Progress indicator for software updates
 Singlemode output port with removable connector adapter
and dust cap. This port transmits optical signals for loss and
length measurements.
The LED below the output port is red when the port transmits
1310 nm and green for 1550 nm.
 Input port with removable connector adapter and dust cap.
This port receives optical signals for loss, length, and power
measurements.
 Multimode output port with removable connector adapter and
dust cap. This port transmits optical signals for loss and length
measurements.
The LED below the output port is red when the port transmits
850 nm and green for 1300 nm.

Universal fiber connector (with dust cap) for the visual fault
locator. The connector accepts 2.5 mm ferrules. The LED below
the connector shows the locator’s mode.