Fluke Versiv, User Manual

Page: 55 / 260

Chapter 2: Certify Twisted Pair Cabling
Settings for Twisted Pair Tests
41
Outlet
Configuration
The
Outlet Configuration
specifies which wire pairs are
tested and which wire numbers the wire map shows for the
pairs. See Figure 14.
To see the wire map for a configuration, tap
Outlet
Configuration
, tap the configuration name on the
OUTLET
CONFIG
screen, then tap
SAMPLE
.
To select a configuration, tap a name on the
OUTLET
CONFIG
screen, then tap
USE SELECTED
.
Note
The OUTLET CONFIG screen shows only the
configurations that are applicable to the
selected Test Limit.
To make a custom outlet configuration, tap
CUSTOM
on
the
OUTLET CONFIG
screen, then tap
MANAGE
, then tap
Create
.
AC Wire Map
The
AC Wire Map
test lets you do tests on links connected
through midspan PoE (Power over Ethernet) devices. See
the Technical Reference Handbook.
When the
AC Wire Map
test is on, this icon shows on the
home screen:
Note
Always turn off the AC wire map test when you
will not do tests through a PoE device. The AC
wire map test increases the time for an
Autotest.
Table 2. Settings for Twisted Pair Tests (continued)