Fluke Versiv, User Manual

Page: 158 / 260

Versiv Cabling Certification Product Family
Users Manual
144
2
On the
TEST SETUP
screen, in the
Bi-Directional
panel, tap the
control to make it show
On
, then tap
SAVE
.
3
Do an Autotest.
4
Halfway through the test, the tester tells you to switch the
input and output fibers.

Caution
Switch the connections at both ends of the patch
panel or fiber under test, not at the tester's and
remote’s ports. If you disconnect a test reference
cord from an output port on the tester or remote,
the reference value will be unreliable.
Note
The directions Main>Remote (main to remote)
and Remote>Main (remote to main) in the bi-
directional results are only the directions of the
optical signals for the second half of the test. If a
fiber fails, the direction does not tell you the
location of the problem.
5
If
Auto Save
is on and the tester is in Smart Remote mode, the
tester uses the next two IDs to save the results for the two
fibers.
If
Auto Save
is off, and you tap
SAVE
or
FIX LATER,
the
SAVE
RESULT
screen shows the next two IDs available. You can
change the IDs if necessary.