Fluke Versiv, User Manual

Page: 115 / 260

Chapter 6: Certify Fiber Cabling
The CertiFiber Pro Home Screen
101

Shows a summary of the test results in the project:
The number of tests that passed.
The number of tests that failed.
 The test setup panel shows the settings the tester will use when
you tap
TEST
or press

.
To change these settings, tap the panel, select the test on the
CHANGE TEST
screen, tap
EDIT
, select different settings on the
TEST SETUP
screen, then tap
SAVE
. See Table 6 on pages 111
and 112.
Note
You can set up tests for any module that the
tester can use, even when no module is attached.

Next ID
: The
Next ID
panel shows the ID that the tester gives to
the next test results you save. For
Smart Remote
mode, this
panel shows IDs for main tester’s input and output fibers.
Tap
Next ID
to do these tasks:
 Enter an ID, select a different ID in the ID set, select a
different set of IDs, or make a new set. The tester adds the
IDs and ID sets you make to the project that shows on the
home screen.
 Turn
Auto Save
on or off.

Operator
: The name of the person who does the job. You can
enter a maximum of 20 operator names.

TOOLS
: The
TOOLS
menu lets you set the reference for fiber
tests, see the status of the tester, and set user preferences such as
the language and the display brightness.

SET REF
: Tap
SET REF
to set the reference and verify your test
reference cords for loss/length tests.

RESULTS
: Tap
RESULTS
to see and manage the results that are
saved in the tester.