Fluke Versiv, User Manual

Page: 105 / 260

Chapter 5: Inspect Fiber Endfaces
Automatic Analysis of Scratches and Defects
91

Caution
If a defect is possibly a dirt particle, clean the
endface and do the inspection again. You must
remove all loose particles because they can move
into the core when you make connections.
GPU167.EPS
Figure 37. FiberInspector Image with Defect Analysis
 A defect, such as a particle of dirt, a chip, or a pit. This defect
is red because it is larger than the limit allows.
 The measurement rings show after you tap
ANALYZE
. The sizes
of the rings are specified by the limit. To specify different sizes,
make a custom endface limit. See the Technical Reference
Handbook.
C
A
B
F
E
D