Fluke Versiv, User Manual

Page: 49 / 260

Chapter 2: Certify Twisted Pair Cabling
The DSX CableAnalyzer Home Screen
35

Shows a summary of the test results in the project:
: The number of tests that passed.
: The number of tests that failed.
: The number of tests with an overall marginal result.
 The test setup panel shows the settings the tester will use
when you tap
TEST
or press

. To change these settings,
tap the panel.
Note
You can set up tests for any module that the
tester can use, even when no module is attached.
 Icons show the status of the
Store Plot Data
and
AC Wire Map
settings. See Table 2 on page 40.

Next ID
: The
Next ID
panel shows the ID that the tester gives
to the next test results you save.
Tap
Next ID
to do these tasks:

Enter an ID, select a different ID in the ID set, select a
different set of IDs, or make a new set. The tester adds the
IDs and ID sets you make to the project that shows on the
home screen.

Turn
Auto Save
on or off.

Operator
: The name of the person who does the job. You can
enter a maximum of 20 operator names.

TOOLS
: The
TOOLS
menu lets you set the reference, see the
status of the tester, and set user preferences such as the
language and the display brightness.

RESULTS
: Tap
RESULTS
to see and manage the results that are
saved in the tester.

TEST
: Tap
TEST
to do the test shown in the test setup panel.