Fluke Versiv, User Manual

Page: 185 / 260

Chapter 7: Use the OTDR
OTDR Results
171

If the tester made measurements at two wavelengths, tap the
arrow buttons to see results for the other wavelength.
Possibly, some events show only at one wavelength.

: The measurement is within the limit.
: The measurement exceeds the limit.
: The tester does not give a pass or fail result to the event. This
occurs for
OTDR Port
,
Hidden
, and
End
events. This occurs for all
events if you use the
Document Only
test limit because
Document Only
does not have values for limits.
When you use a test limit that has a reflectance limit,
Hidden
events show a
FAIL
status if their reflectance exceeds the limit.
To see details for an event, such as limits for measurements and
the
SEGMENT ATTENUATION
coefficient, tap the event in the
table.