Fluke Versiv, User Manual

Page: 43 / 260

Chapter 2: Certify Twisted Pair Cabling
Connectors, Keys, and LEDs
29
TALK
LED comes on when the talk function is on (

). The LED
flashes until the main tester accepts the request to talk.
TONE
LED flashes and the tone generator comes on if you press

when a main tester is not connected to the remote.
LOW BATTERY
LED comes on when the battery is low.
The LEDs also have these functions:

Battery gauge (see Figure 1 on page 13)

Volume indicator for the
TALK
function

Progress indicator for software updates


: Starts a test. Turns on the tone generator if a main
tester is not connected to the remote.


: Power key


: Press

to use the headset to speak to the person at
the other end of the link. Press again to adjust the volume. To
turn off the talk function, hold down

.

Connector for the AC adapter. The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge
the Battery” on page 11.

Micro-AB USB port: This USB port lets you connect the tester
to a PC so you can install software updates in the tester.

Headset jack