Fluke Versiv, User Manual

Page: 107 / 260

93
Chapter 6: Certify Fiber Cabling

Warning

Before you use the tester, read the safety
information that starts on page 5.
Overview of Features
The Fluke Networks CertiFiber ® Pro Optical Loss Test Set (OLTS)
modules attach to Versiv ™ main and remote units to make
rugged, hand-held testers that let you certify, troubleshoot, and
document optical fiber cabling installations. The testers include
these features:

Measures optical power loss and length on dual-fiber,
multimode cabling at 850 nm and 1300 nm (CFP-MM) or on
dual-fiber singlemode cabling at 1310 nm and 1550 nm
(CFP-SM). The four-wavelength module (CFP-QUAD) measures
at 850 nm, 1300 nm, 1310 nm, and 1550 nm.

Interchangeable connector adapters on input and output
ports let you make reference and test connections that agree
with ISO standards for most SFF (small form factor)
connectors.

Visual fault locator helps you find breaks, bad splices, and
bends and verify fiber continuity and polarity.

Optional FiberInspector ™ video probe lets you inspect fiber
endfaces and save the images in test reports.

You can save approximately 30,000 fiber test results in the
tester’s internal memory. You can save more results on a
removable flash drive.