Fluke ScopeMeter 190 Series, Programming Reference Manual

Page: 95 / 120

’ Page 3.66
’***************** Begin example program *****************
CLS ’Clears the PC screen.
OPEN "COM1:1200,N,8,1,CS,DS,RB2048" FOR RANDOM AS #1
PRINT #1, "SS 8" ’Sends SAVE SETUP command.
’Setup saved in setup memory 8.
GOSUB Acknowledge ’Input acknowledge from ScopeMeter
PRINT "The present setup data are stored in setup memory 8."
PRINT "The remainder of this program will restore these."
PRINT "To test if this works, change the present settings"
PRINT "and verify if the ScopeMeter returns to the original"
PRINT "settings after continuing the program."
PRINT
PRINT "Press any key on the PC keyboard to continue."
SLEEP
PRINT #1, "RS 8" ’Sends RECALL SETUP command.
’Setup recalled from register 8.
GOSUB Acknowledge ’Input acknowledge from ScopeMeter.
PRINT
PRINT "Original settings restored"
CLOSE #1
END